"You must select the number to dial to disable call waiting.
Put your camera in manual mode by turning the mode dial to the "m" setting as pictured above.
There is no dial tone.
The phone number the wizard is trying to dial is currently busy. Click Redial to try again. Click Help for more information.
Media Center cannot detect a dial tone.
Listen for the dial tone and then dial the number you want.
We hear dial tone, dial digits, and hear ringing over the same channel on the same pair of wires.
The modem could not detect a dial tone. For troubleshooting information, click Help.
A dial tone was not detected. Please check your telephone cable connections, and be sure the line is not in use by someone else.
Turn the mode dial to select Auto bracketing mode.
To cancel the auto bracketing mode, turn the mode dial to select another mode.
To cancel the multi exposure mode, turn the mode dial to select another mode, or set the main switch selector to L (lock) to turn off the power.
Use the mode dial to select the desired mode, and press the updown buttons to select the desired setting where applicable.
Yes, it's dead. There's no dial tone.
Use the mode dial to select the desired mode (i.e., self-timer, multi exposure, auto bracketing, continuous shooting, normal, exposure metering user setting, previewAE lock user setting, and ISO user setting modes).
First you pick up the phone, you will hear the dial tone, and then put2 quarters into the slot, then you dial the phone number.
A： Well, there's one more thing. I can't get a dial tone on the phone; it's dead.
Turn the mode dial to select normal mode.
Samuel holds the phone to his ear till the dial tone goes busy.
Listen for a dial tone
Did you hear a dial tone?
First, insert a dime into the slot. When you hear the dial tone, dial the number you want.
And without the dial tone, how will movie producers ever indicate that someone's hung up on a character?
operate a dial to select a telephone number.
To cancel the continuous shooting mode, turn the mode dial to select another mode, or set the main switch selector to L (lock) to turn off the power.
In data communications, a facility of some modems which allows the modem to dial when a dial tone is supposed to be present but none is facility is important in some PBX systems which use nonstandard lines that certain modems will interpret as a dead line.
The wizard could not detect a dial tone.
The dial tone is that state of awareness of the divine that Buddy speaks of when he says- when he speaks of being with God before God said, "Let there be light."
The typical stove has four burners arranged in a square, and a dial to control each.
The use of keys or push-buttons instead of a rotary dial to generate a sequence of digits to establish a circuit connection. The signal form is usually tones.
Listen for a second dial tone. When you hear the tone, click Continue.
There is no dial tone. Make sure your phone line is properly connected to the modem.
Wait for dial tone before dialing~~Prevents dialing until modem receives a dial tone.
Turn the mode dial to select multi exposure mode.
Media Center cannot detect a dial tone. Make sure that your telephone cable is plugged in to your computer and your telephone outlet.
Set the main switch selector to A and set the mode dial to normal mode.
No dial tone. The phone line is in use or not connected
The display includes an hour/minute dial to the upper right, a 5-day power reserve display on the bottom left and the “key of time” system in the upper left.
Please press "9" first and then the area code in Beijing and the phone number you want when hearing the long dial tone.
A man whose only kitchen skill involves the speed dial to Domino's is condemned to a diet of grease, salt, white bread, and sugar.
When you hear the dial tone, dial the number.
國文精選館
