Tungsten is classified among the metals.
Water oxidize some metals and rust.
This review summaries the application of ion exchangers in the separation and determination of alkali metals, alkali-earth metals, noble metals, rare earth elements and actinoid.
Chlorine directly syntheses chloride with certain metals in wet conditions.
The heavy metals were detected with atomic absorption spectrum, atomic fluorescence spectrum and plasma emission spectrum, 9 heavy metals were measured quantitatively.
The State Council is, however, separately to prescribe those for the projects in the exploration of resources such as petroleum, natural gas, rare metals and precious metals.
But the surface of overglaze ceramics is uneven. Overglaze ceramics have exceeded risks of heavy metals.
A noteworthy factor in the photocatalysis process is the recovery of precious metals, including: platinum, gold, rhodium, silver and palladium.
At present inspection area have included clothing, textile, paper, stationery, packing material, metals and electronic products and so on.
The Yi areas are not only rich in coal and iron, but are also among Chinese major producers of non-ferrous metals.
They tend to have plain wedding rings in the traditional metals, 18-carat gold or platinum, although palladium is making a little bit of an inroad into that situation due to price.
"Precious metals tend to occur as scattered particles randomly distributed, so a large sample of ore is required. Such large samples (typically containing gold, silver, and lead) are still most economically assayed by this ancient method, which involves several steps of heating and cooling."
Acids eat into metals.
silver-rare earth metals electrical contact material
The current record-breaking run for some speciality metals mirrored price movements in base metals.
Huizhou taiyuan metals soldering tin products Co. LTD.
Most of nonferrous metals mines in China have entered into middle and later stage, and many main nonferrous metals bases are faced with serious resource crisis.
The classical Greek civilization knew of seven metals: gold, silver, copper, iron, tin, lead and mercury.
Fatigue of metals is an energy dissipation process. The main energy dissipation includes the internal friction and the stored energy.
One main strategy is the use of bio-degradable materials, which can reduce the damage caused by plastic bags, packages and metals to the environment.
DN and DN1 series marsh welders are widely used in the welding of low carbon steel strip, corrosion resistant plate, wires, silver contact and lots of non-ferrous metals.
This machine tool is characterized by high power, good igidity, large accuracy margin and serice life and it is an ideal equipment for machining medium and small precision and comples pats made in all kinds of material(especlally non-ferrous metals) and autometic large-lot production.
recovery of nonferrous metals
You can hammer soft metals into shape.
G4265 , G4265S, GZ4265column horizontal band saw machine is mainly used to cut various ferrous metals and no-ferrous metals.
The results of determining the alkaline and alkaline earth metals in the treated gasoline showed there was no loss of metals from the catalysts.
Most natural electrum also contains copper, iron, palladium, Bismuth, and perhaps other metals.
Faceted tungsten Rings the high polish shine is the most visible trait that distinguishes tungsten from all other metals.
A kind of exam paper database system for technology of metals for mechanical and the non-mechanical students is proposed. This software system is convenient for management and upkeep.
strong acids attack metals.
Other metals have suffered a similar clobbering.
China Wenzhou Huihuang Metals Limited product high quality metals, door lock, mortise lock , door handles, rosette door handles series.
Base metals and gold are often found in association with magnetic minerals such asmagnetite and pyrrhotite.
Therefore, the physiological effects of heavy metals stress on some mineral elements metabolism in plants were summarized in this paper.
If made of loose earth, it will weigh little; if stones are taken with it, it will weigh more; while, if metals were put in, it would, according to the kind of metal you take, weigh still more.
Overheated metals may cast badly .
waste water utilization in extractive metallurgy of heavy metals
Including coal, iron, nonferrous metals, non-metallic and other minerals have done a lot of work.
Many aircraft parts are made from highly specialised metals and other materials: will there be enough of these to go around?
cemented carbides,hard metals
recovery of valuable metals in copper extractive metallurgy
A refining process for nonoxidizing metals, such as silver and gold, in which a metallic mixture is oxidized at high temperatures and base metals are separated by absorption into the walls of a cupel.
"Acid: Any substance that in water solution tastes sour, changes the colour of acid-base indicators (e.g., litmus), reacts with some metals (e.g., iron) to yield hydrogen gas, reacts with bases to form salts, and promotes certain chemical reactions (e.g., acid catalysis)."
Useable with all ferrous and nonferrous metals, including tin-coated steel, copper, brass, and other metals prone to staining.
The battery is encased in stainless steel and is reported to have to maintain a temperature of 500 degrees to keep the metals inside in liquid form.
(of metals) decorated or inlaid with a wavy pattern of different (especially precious) metals.
The Paper presents the processes of corrosion, bubble movement and vaporization of metals in WEDM by using high speed photography, and also describes the process of electric discharge in WEDM.
Last year, prices of many non-ferrous metals such as aluminum, copper, zinc and nickel hit record highs at home and abroad as a result of strong demand and hedge funds buying up metals futures.
The instrument is suitable for determing of anions, alkali metals and alkali earth metals in nuclear fuel reprocessing solution and high level liquid waste.
"Cupel:a porous cup, often made of bone ash, used in assaying to separate precious metals from base elements such as lead."
We operate automatic lathes for the business machining all kinds of metals and non-metals.
strong acids bite in metals.
國文精選館
