Laboratory and industry experiment about adding limonite in sintering are introduce in the paper, expound reinforcing measures of limonite sintering.
The influence of sintering time and sintering temperature on the crystalline structure of cordierite synthesized from waste aluminum sludge was studied in this paper.
Meanwhile, Wet methods of lining building, firing and sintering are discussed.
The green article is subsequently fired so that the shaped article is hardened by sintering its fly ash matrix.
This text has introduced the application of the domestic high voltage inverter in the dust removal air blower of sintering plant Jinan Iron and Steel Corporation.
Their main usage are for metallurgical industry for example, ferrous smelting furnace; Besides, they are also used in the sintering zone of cement rotary kiln and regenerator of glass furnace, etc.
ionic crystal sintering kinetics
Experiment study on AlN ceramics low-temperature sintering aids
The paper introduces the cause of reducing primary feeding hopper throat inlet to improve the ventilation of sintering mixture, which has certain significance to ISP process sintering production.
The sintering practice with proportioning of Brazil high grade concentrates in Shougang sintering plant for the purpose to increase sinter grade and decrease BF slag ratio was presented in this paper.
Saline mud can be fired to sinter bricks and ceramsite instead of clay, salt content is greatly reduced in the sintering process.
In order to achieve the requirement of feeding in sintering process, a reasonable particle segregation in top, middle and foot layers of mixed bed, charging table and roller-conveyor are explored.
The sintering type of the billet is an instaneous sintering with a little quantity of liquid.
The sintering pot and plant tests with proportioning of MAC ore were conducted in XIANGGANG sintering plant.
The concrete measures of developing prodaction at the sintering plant in SISG in recent years;
The hackle screens are mainly used in the shaking screen classification attachments that are in iron-smelting plants and sintering ones of metallurgical industry.
The effect of electrocast zirconia and monocline zirconia and two types of binders(anhydrous and un-hydroxyl resin and liquid paraffin)on the sintering of fired magnesia-calcia brick are investigated.
Instead, "sintering" or "firing" is the process typically used.
The effect of setting of sintering temperature curve on the rate of qualified products and quality of products is studied.
The sintering production problems of pan pelletizer in the Anyang Iron & Steel Group are introduced. The reconstruction measures for solving these problems and its effect are pointed out.
The air leakage on sintering machine affects the technological and economical indexes of sintering process.
In experiment, microwave oven is used to simulate microwave sintering cavity, then temperature data are gained and model is established.
The oven is in order to obtain sintered layer, sintering layer directly affects the service life of the furnace, the furnace chamber was built, immediately before the baking oven;
Thermal-sintering and hydrogen plasma treatment enhance the electron emission of NCDF cathode
The sintering curves showed that the protective agents could effectively suppress the sintering.
In the ceramic industry, since the processing performance of each product is different, ceramic has the strict requirement to sintering temperature.
The reform process of sintering material mixing ground and its effect in Xingtai Iron and Steel Company is introduced.
This project obsoletes old sintering machines to promote the automation and large size of the equipment and the pollution is eliminated from the source by using advanced technologies and equipment.
His team at Loughborough University has invented a high-speed sintering system.
The changes of the sintering strength index and sintering loss rate of the mixes with different binders and pitches were discussed.