7、This paper introduces emphases, difficulty and countermeasure in the construction of pusher type continuous reheating furnace.
11、This paper introduces that the combustion technology of coal-water-slurry (CWS) can be applied successfully to the reheating furnace.
15、In this paper, PCA and statistical control chart have been used to detect process operating faults on an industrial rolling mill reheating furnace.
19、A universal formula is raised to calculate flow of reheater when a unit of work substance is pushed out from extraction steam in reheating unit, and verified...
23、Briefly, the main operations of steel rolling are: Heating: steel ingots or billets are heated to a proper temperature above the recrystallization temperature in a soaking pit or reheating furnace.
2、Determination of optimal reheating pressure in Organic Rankine Cycle system
6、The service life of the reheating furnace has been prolonged when it was used.
12、This paper introduces new a kind of type structure of energy conservation reheating furnace, analyses the function characteristic.
17、The new process and technology on the "gas replace heavy oil" engineering project for reheating furnace of the 1700 hot strip in WISCO are introduced.
22、The reheating turbine and boiler are operated as single unit, so the turbine speed-power control system must be adjusted in accordance with the dynamic characteristic of the whole unit.
3、Development of regenerative reheating magnesium finery based on furnace group
9、Mathematical Model for delay process of a reheating furnace is studied in this paper.
16、By the industrial experiment, the distribution of continuous casting billet preheating temperature is measured, and the economic load range of reheating furnace is established.
24、Minteq International Inc. is the largest company in the world offering laser systems, Ca wire feeding technology, probes and maintenance programs including equipment, materials and service for blast furnace, EAF furnace, BOF, ladle, tundish, reheating furnace as well as other metallurgical furnaces.
5、Automatic control system for reheating furnace of 1549mm hot strip mill in TISCO
14、Some negligence in design about discharge method of reheating furnace limit the speed and the output of PQF mill line.
25、The wearproof refractory for rubbish incinerator is developed by this factory with reference to the foreign preduct of the same kind and the practical working circumstances in China, which has such advantages as good wearproof ability, small reheating linear change and good thermal resistance.
10、In the meantime the author makes an assessment of the operation of the reheating furnace in order to provide the decisive evidence for optimization and improvement of the reheating furnace.
21、The present status of the research of Mg alloy semi-solid processing from three aspects including the preparation of non-dendritic structure, reheating and semi-solid processing were described.
13、In addition, the writer studies optimize control based on intellect predicting of temperature field of reheating furnace iron bodies.
4、Then there is reheating furnace, reducing mill and cooling table.
1、The research and application of HTAC on rotary reheating furnace
8、Study on critical region reheating temperature of cold rolled and continuous annealed DP600 steel
20、Change that by placing an ice cube in the center of the rice and then wrapping the top with plastic wrap, with a few punctures of course, before reheating it.
18、The heat flux to slab surface of a walking beam reheating furnace along length of the furnace is computed, and total heat exchange factor is also calculated.
國文精選館
