7、If an oil slinger is used behind the inner pinion bearing cone, deduct the thickness of the slinger from the dial indicator reading and use that total for shim selection.
2、Familiar with the machining of various measurements with inspection tools, including micrometer, dial indicator, height gauge, etc...
6、However if clutch-pedal pulsations are noticed or if gear shifting is hard and gears jump out of mesh then alignment should be checked. this requires a special alignment arbor and dial indicator .
3、The measuring and analyzing result for a dial indicator indicated that dial indicators are inapplicable for measuring the high frequency signals, such as the run out of high speed rotating shafts.
9、The dial indicators are equipped with shockproof mechanism to ensure the relable accuracy and long tool life.
8、Must be familiar with measuring equipment such as micrometers, verniers, plug gauges, dial bores and various dial indicators.
1、Pry the crankshaft forward, position the dial indicator to zero.
5、Base on the working practice of length measurement implements checking and fixing, this paper summarize the indication error reason of dial indicator and the fixing measure.
4、A feeler gauge a dial indicator or a cam-angle meter can be used to test the amount of contact-point opening.
国文精选馆
