The programmable logic device integrated circuits contain programmable core logic powered at a programmable core logic power supply voltage.
As another example, when the power supply voltage provided to inverters 501-506 increases, the time it takes for edges in VIN to pass through inverters 501-506 decreases.
The power supply voltage may be controlled by replacing D1, D2, R1 and R2 with a variable voltage reference.
Different voltages are needed for erasing and reprogramming of EEPROM, while flash memory requires only a single power supply voltage, and consume less power in the operation.
During data loading operations, the memory elements may be powered with a power supply voltage equal to the programmable core logic power supply voltage.
If the efficiency of servo amplifier is considered, it is practicable that the power supply voltage is about 3 times as large as the servo amplifier output voltage corresponding to rated current.
It is characterized by that it includes the following several portions: trans former for transforming inputted power supply voltage;
The power supply voltage line includes an edge part formed in an obtuse Angle.
Or under same output power and load, the power supply voltage of the former is only one half of that for the latter.
During normal operation the memory elements may be powered with a power supply voltage that is larger than the programmable core logic power supply voltage.
Simplified distribution levels: According to the power supply voltage levels.
國文精選館
